Frits for steel sheet

We produce four types of powder enamels

Easy to clean powder enamel, which is direct enamel with all properties of easy clean enamel and suitable for electrostatic spraying.
Ground coat powder enamel, which is suitable for electrostatic spraying and is used as any other ground coat enamel in a normal process 1C/1F (on coat, one firing) or in a special process 2C/1F(two coat, one firing).
Cover coat powder enamel, which is suitable for electrostatic spraying and is usually used with ground coat enamel, powder or wet in process 2C/1F (two coats, one firing) or 2C/2F (two coats, two firing).
RTU ground coat enamel (premix), which is used in a special process 2C/1F (two coats, one firing). The first coat represents RTU enamel, which is mixed with water and sprayed. The second coat is cover coat powder enamel applied with electrostatic spraying over the RTU ground coat enamel. Both enamels are then fired only once.

are multi-purpose enamels to be applied on cooking utensils, flat components and sanitary ware, as well as on thicker or problematic metal sheet and are usually a mixture of two, three or four frits, depending on the buyer's requirements. The mixing of frits enables optimum adherence within a wide firing range.